Apc smart ups sua1500 manual

Circuit Breaker - the circuit breaker button located on the rear panel of the Back-UPS will stick out if an overload condition forces the Back- UPS to disconnect itself from utility power. If the button sticks out, disconnect non-essential equipment. Reset the circuit breaker by pushing the button inward.

A battery that is near the end of its use- ful life has insufficient run-time and should be replaced. Chirps for 1 Minute Every 5 Hours - this alarm is sounded whenever the battery has failed the automatic diagnostic test. The Back-UPS will also emit a chirping sound. Inspect the UPS upon receipt.

APC designed robust packaging for your product. However, accidents and damage may occur during shipment. Notify the carrier and dealer if there is damage. Check the package contents. The package contains the UPS, the front bezel, the rail kit, and a literature kit containing:.

Mounting rails are supplied for the standard 4-post rack. Two-post racks require only the mounting brackets. Place the UPS where it will be used. The UPS is heavy. Select a location sturdy enough to handle the weight. Do not operate the UPS where there is excessive dust or the temperature and humidity are outside the specified limits. To lighten it, you may remove the battery before mounting the unit in the rack Steps 1 and 2. Connect battery plug to UPS. Tuck white battery cord into space above connector.

Connect equipment to the UPS. Note: Do not connect a laser printer to the UPS. A laser printer draws significantly more power than other types of equipment and may overload the UPS. Add any optional accessories to the Smart-Slot. Using a power cord, plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension cords. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement.

Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Smarter productivity with ability to tailor to your specific application needs Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.

Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Disconnected battery notification Warns when a battery is not available to provide backup power.

Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.

Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Boost and Trim Automatic Voltage Regulation AVR Gives higher application availability by correcting low and high voltage conditions without using the battery not available on all models. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.

Resettable circuit breakers Enables a quick recovery from overload events. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair MTTR. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Predictive failure notification.

Provides early-warning fault analysis ensuring proactive component replacement. Virgin Islands. Technical Specifications Print. Topology Line interactive. Waveform type Sine wave. Transfer Time 2 ms typical. Input voltage range for main operations 75 - Adjustable, 82 - V.

Number of Power Cords 1. Battery type Lead-acid battery. Typical recharge time 3hour s. Replacement Battery RBC